Flexible magnetostrictive level sensor SENS U1-4/20мА

Specifications

		—
Guide pipe length, mm		from 1 000 to 15 000
Materials contacting the medium		stainless steel AISI 304, tetrafluoroethylene polymer (Teflon)
Acceptable main inaccuracy of level measurement (for current signal 4 - 20 mA)		±3 mm or ±0.05 % of measurement range (higher value to be used) for “0” modification; ±2 mm or ±0.05 % of measurement range (higher value to be used) for “1” modification
Acceptable main inaccuracy for level measurement (for digital signal HART), mm		±3 mm for “0” modification; ±2 mm for “1” modification
Monitored media features	temperature, ℃	from -50 to +100 (for non-freezing)
	pressure, MPa, not more than	0.05
	density, kg/m³	from 600 to 1 500 ¹⁾
Upper / lower non-metering areas, mm, not less than		100 / 100
Water and dust ingress protection degree as per IEC 60529		IP66
Explosion protection marking		0Ex ia IIB T5 Ga X
Power supply voltage (Up), V		from 9 to 30 (DC)
Power consumption, W, not more than		1
Weight, kg, not more than		10
Service life, years		15
Note. ¹⁾ Exact maximal density volume depends on the type of the used float(s)